Kinematic Mirror Mount, 1 inch, Hex Adjusters

These popular 1 inch Mirror Mounts are designed to accept round, front surface mirrors or beamsplitters up to 25.4 mm diameter. Holes provided in the back plate are designed for universal mounting on almost all hardware. The M4 (8-32) clearance mounting holes are positioned directly below the center of the Mounted Mirror.

These mounts can be bottom mounted on a Half-inch Posts, StablePillar™ or one of two riser blocks. Alternatively, they can be side mounted on a rod system carrier. Mirrors are retained in the mount by two delrin inserts and a nylon tipped set screw.

This OEM version of the Precise 1 inch Mirror Mount is the same as the standard mount (#53-2218-000) except the knurled stainless adjusters are replaced with more compact hex adjusters.

Angular Adjustment Range: ±10°
Pivot Arm Length: 38 mm
Actuator Thread Pitch: 100 TPI
Angular Resolution or Sensitivity: 3.8 arcsec (0.001°)
Clear Aperture: 23.8 mm
Component Dia: 25.4 mm